100% Canadian Owned and Operated
Welcome to Universal Field Supplies!
The 4SRT Chester has been designed specifically to aid climbing SRT. The harness offers a great balance of effectiveness and comfort.
It is designed to keep a breast clip up and easier to carry on rising. The shoulder piece is worn loosely and do not need to be attached to the belt. The attachment loops are positioned at various heights so tha...
This Split Tail is made from Samson ArborMaster Goldstreak. Use it with a split tail climbing system, with contrasting colors. It can also be used as a dual anchor point system for limb walking.
These cast aluminum spur pads are much more comfortable than the typical leather "L" pads that often come in a set of spurs. They are very lightweight, and the one-piece aluminum cast will not wear out like leather. This makes them a great investment.
Foam rubber padding is replaceable.
These will fit Klein and Buckingham spurs
The At Height Armor Prus features a blended technora cover that prevents melting and glazing. This cover is rated 234°C higher than standard polyester and has very low stretch. The Armor Prus also meets ITC climbing competition rules.
The Spectra core incorporates a safety feature made of twin Kevlar strands. In the event of cover failure, this ...
This is a 10mm x 30" with stitched eyes on both ends. The eyes are smaller to stop them from slipping over the carabiner or snap. 5000 lb. tensile.
The Bee-Line 3/8" (10mm) single eye stitched split tail offers the user the ability to make a Blake's or Tautline hitch onto their climbing line for ascending and for maneuvering.
The two-inch stitched pattern creating the eye is covered with heat shrink tubing for longer wear. The stitched eye is tested to meet a minimum 5,000 lbs. tensile pul...
This lanyard is made from Yale Blaze climbing rope. Hardware is attached using stitched splices. These lanyards are available with in two versions. Order rope grab or hitch cord adjuster separately.
1/ USR aluminum snap one end with plastic thimble spliced into opposite end
2/ USR aluminum snaps on both ends
The Hip Prusik loop is made with durable Tenex Tec, and is spliced on a quality locking rope snap.
This Eye & Eye Hitch Cord provides a blend of heat tolerance and grip. Ocean Polyester created it by combining Aramid and Polyester.
Standard size is 10mm X 32". Other lengths are available as a special order
Minimum Breaking Strength is 30kN
Use a stiffened tether with the Rope Wrench, to connect the wrench to the climbing system. Doing this pushes the wrench up the rope during ascent, keeping slack out of the system.
Two replacement bottom straps on split rings. They are made of leather, and will fit all models of Treehog spurs and other brands of spurs as well.
Clearance price applies to in stock product only.
A set of replacement C-shaped spur pads with rigid metal inserts. These will fit all models of Treehog spurs.
Clearance price applies to product in stock only.
CMI’s Foot Ascender makes climbing easier! This boot-mounted device keeps tension on the rope, which allows for easier advancement of the main ascender. This, in turn, provides better mechanics by keeping your body upright. The ascender is anodized aluminum and has hard coated cams.Available in right and left foot models.
CMI forges their eights out of aircraft-grade aluminum alloys, instead of the traditional steel. This design choice keeps their product light, produces excellent friction, and maintains the safety standards. Hot forging their product produces an advantageous molecular alignment. CMI's exclusive hardcoat mixture protects the aluminum.
The CMI Res...
Nothing tips the scales like these little gems! Featuring 1/2" rope capacities and 7075-T6 anodized aluminum side plates for unparalleled strength, these pulleys have a place in every climber or rescuer's pack.
Rescue model. Purple anodized aluminum sideplates, 1 1/4" aluminum sheave, bushing, and aluminum axle.
Double sheave rescue model. Purple anodized aluminum sideplates, two 1 1/4" aluminum sheaves, bushing, and aluminum axle.
Ideal for arborist rigging where two independent tie-ins are required. Purple Anodized Aluminum sideplates, 1 1/4" Aluminum sheave, Bushing, and Stainless Steel axle.
This CMI Standard 8 Ring has the same design as it did in 1974. However, it is still as popular today as it was back then. CMI crafts it from 6061-T6 aluminum alloy, maximizing it’s strength-to-weight ration. They also hard coat it with their proprietary mix to further extend its working life. Available in black. The Standard 8 is both versatile...
LIGHT, COMPACT AND EFFICIENT
•Equipped with a lever that keeps the device open, thus facilitating the insertion of the rope and preventing it from coming out.
•Cam/lever mechanism totally integrated in the body.
•Developer to grip also on dirty and icy ropes, thanks to the self-cleaning cam.
•Fully adjustable webbing for a correct positioning.
3/4" Snap Hook
Drop Forged Aluminum
100% proof loaded to 3,600 lbs (16kN)
Min tensile strength 5,000 lbs (22.2 kN)
The double-locking snap hook has a 3/4" opening that is self-locking. It is made from drop forged alloy steel and is 100% Proof loaded to 3,600 lbs (16 kN). The snap hook has a minimum tensile strength 5000 lbs(22.2 kN) and a weight 9.8 oz.
Designed for use with the latest friction knots
Hand spliced and tagged
Made from 3/8" Samson Tenex rope
The Falteimer Folding Cube is perfect for containing and transporting throw lines with weight bags. Users can unfold it for use in a matter of seconds. When storing, the bag turns into a small bag to save space. The bag can hold lines and weights firmly without tangling. If you are tired of watching your cubes rot and decay, its time for Falteim...
Lightweight aluminum climbers with comfortable padded fiberglass cuffs and Velcro® straps. Tree Gaffs 2-7/8" long, 4.3 pounds.
German engineers designed Gecko® gaffs to fulfill the comfort needs of modern tree and utility climbing personnel without all the weight and mass associated with traditional-style spurs. Weighing in as the lightest alumi...