100% Canadian Owned and Operated
Welcome to Universal Field Supplies!
The Petzl Minder Pulley has side plates, designed for use with a Prusik friction hitch in progress capture systems. It has a large diameter sheave mounted on sealed ball bearings for great performance. The Minder Pulley accepts up to three carabiners.
Min. rope diameter: 7 mm
Max. rope diameter: 13 mm
Sheave diameter: 51 mm
Efficiency: 97 %
The Petzl Twin is a strong and efficient double Prusik pulley. It has special side plates, designed for use with a Prusik friction hitch in progress capture systems. It has parallel mounted sheaves and an auxiliary attachment point for creating different types of hauling systems.
The twin's sheaves are large in diameter, and are mounted on ...
DMM’s Rapide isn’t just another fairlead pulley. It is the hub of a friction-hitch work-positioning system that helps arborists align carabiners properly. For durability, it has a forged 2014 T6 alloy construction with rope-friendly flares and rounded edges.
Unlike any other micro-sized pulley, it has a third hole that gives the ability to conne...
The Pinto Pulley is designed to be textile friendly. With hot forged curves and fairlead flares, ropes can run along the pulley without cutting in. This will save you money on costly replacement and repairs, by minimizing damage to your equipment. Aside from preventing damage, the Pinto is also versatile. Users can clip, hitch, splice or thread ...
Nothing tips the scales like these little gems! Featuring 1/2" rope capacities and 7075-T6 anodized aluminum side plates for unparalleled strength, these pulleys have a place in every climber or rescuer's pack.
Rescue model. Purple anodized aluminum sideplates, 1 1/4" aluminum sheave, bushing, and aluminum axle.
Ideal for arborist rigging where two independent tie-ins are required. Purple Anodized Aluminum sideplates, 1 1/4" Aluminum sheave, Bushing, and Stainless Steel axle.
Combines a swivel with a pulley that saves vertical height and lets you remove and install the rope while keeping the pulley attached to the anchor
Replaces a conventional pulley, carabiner and swivel & is lighter, less expensive & save valuable space
Weight: 9.2 oz (260 gm)
Breaking Strength:2 x 18 kN=36 kN ( Mini Pulley = 23 kN)
This compact, low profile swivel is ideal for special uses where minimum size and weight are required
Swivels use high strength stainless axles and sealed ball bearings
Weight: 3.52 oz (99 gm)
Breaking Strength: 26 kN
Working load: 5 kN
The Rock Exotica Hydra pulley combines a great pulley, efficient swivel, and rigging plate all into one unit. The Hydra shines as a rolling attachment point on rope bridge harnesses, where the swivel eliminates twisting of the climbing line. Other uses include running the hydra to tend your friction hitch on a lanyard, using it to tend a frictio...
Double sheave rescue model. Purple anodized aluminum sideplates, two 1 1/4" aluminum sheaves, bushing, and aluminum axle.
The bronze swivel snap can be used to connect a micro pulley to a climbing system to maintain a fair lead between the climbing line and friction hitch. The micropulley and swivel snap also works in a 2-in-1 safety prusik lanyard to make the lanyard easier to adjust with one hand.
A perfect addition to any arborist's tree climbing gear.
The DBI RescueMate Prusik is a single sheave pulley. The pulley provides a great mechanical advantage, which translates into more hauling power for the user. The pulley also incorporates swivel cheeks. These extend beyond the surface of the rope to protect it from abrasions.
The pulley also has several features that contribute to its durabilit...
When lifting especially heavy loads, a user can multiply a winch's power using pulleys. This double-pulley has the same aluminum and stainless steel construction as the side snatch block but has two 100 mm (4'') deep groove sheaves. A user, by using two double pulleys, can exert a whopping four tons of force on a load!
Petzl designed this pulley for Tyrolean rope traverses. It is also useful for speed line operations in tree care. Users can attach up to three carabiners simultaneously. Petzl designed it to work with ropes up to 1/2" (13mm) diameter. It has a maximum working load of 10kN (2248 lbs of force).
The CMI RP151 Tri-Tie Pulley is great for arborists that need three independent tie-ins. It has one orange and one black side plate, both made of anodized aluminum. The pulley has a 1 1/4" aluminum sheave, a bronze bushing, and an aluminum axle.
Minimum Breaking Strength is 7000 lbs.
Designed to work with 1/2" rope.
These Petzl swivels prevent rope from twisting when the load is turning. They provide excellent performance and reliability, due to maintenance-free sealed ball-bearings. They are designed for two-person loads, and up to three connectors can be attached to the ends.
Breaking strength: 36 kN
Weight: 150 g
CE, NFPA 1983 Genera...
Arborists use DMM retrieval cones to remove their climbing and rigging systems from trees. Use the yellow cones on the smaller DMM Pinto Pulley on the newer version of Teufelberger's pulleySAVER. The larger red cones are for the Teufelberger multiSAVER, fimbiSAVER, and the DMM Pinto Rig pulley on the older Tuefelberger pulleySAVER.
Cones come ...
Aluminum low friction rigging rings. These products are a real alternative to replace blocks in light rigging operations. The hard coated anodized surface is rope friendly and offers low friction against rigging lines. They can be spliced in rigging slings and used in different configurations as a rigging point or to redirect rigging lines.