100% Canadian Owned and Operated
Welcome to Universal Field Supplies!
Aluminum low friction rigging rings. These products are a real alternative to replace blocks in light rigging operations. The hard coated anodized surface is rope friendly and offers low friction against rigging lines. They can be spliced in rigging slings and used in different configurations as a rigging point or to redirect rigging lines.
The At Height Spider Leg Balancer is used to help balance loads during rigging. You can attach the spider leg with a prusik hitch on either the rigging line or Dead Eye Sling. This gives you the option to create a second (or more) attachment to the limb being rigged. The prusik hitch allows for quick adjustment to create perfect balance.
The Tenex Dead Eye Sling is manufactured by the experts at ABR with 3/4" Samson Tenex Tec. It features a Cordura sheath for added friction protection.
Several lengths available.
Breaking strength 2400 LBS
This At Height whoopie sling features a permanent eye splice at one end and an adjustable eye at the other. It acts as a false crotch, so there are no knots required. Each is permanently tagged with its capacity.
This block and tackle set comes with fifty feet of 1/2" 16 strand Blue Streak rope. Its locking cam is rate to 500 lbs and its safe working load is 2250 lbs. It has a five-to-one lifting ratio.
Perfect for the arborist who needs a reliable addition to their rigging system.
The Buckingham OX BLOCK™ is a rope snatch block. It has a built-in friction bar used for hurt man rescue and lowering, snubbing, and raising. When lowering, tension is transferred from the worker to the snatch block. It replaces standard handline, parted, and various snatch blocks.
It also has greater working load limit than blocks of similar si...
Professional arborists use Buckingham’s Port-A-Wrap to safely lower heavy branches or logs. It is a friction device that allows them to easily control loads many times their own weight.
First, the user wraps their rigging line around the Port-A-Wrap. As it is a friction device, friction increases with the more wraps taken. When compared with wra...
Anyone who uses a chainsaw knows the importance of regular maintenance. Still, getting the perfect angle on your blade can be tricky. Chain Saw File handles feature an angular guides and contact surfaces that maintain the perfect filing angle for accurate, uniform sharpening of all chain teeth.
Available in wood, and plastic with attachable fili...
Colorado Mountain Industries makes their Cable Able Series for hostile environments and maximum service life. They have expanded their original line to facilitate the needs of steel cable users. It has blue anodized aluminum side plates, a 2 3/8" aluminum sheave, a needle bearing, and a stainless steel axle.
The sheave is steel, which CMI trea...
These are the original CMI rescue pulleys. They set the standard for lightweight, compact, and functional pulleys 50 years ago. They feature stainless steel side plates, 2- 3/8" diameter steel sheave, bearing, and a stainless steel axle.
CMI’s Cable-Able series in an extension of their popular Classic design. CMI created it to add compatibility with steel cable, while retaining the same dependability they have come to be known for. The RC105 has a hardened steel sheave, which is treated with an exclusive anti-corrosion formula. This creates a durable product that will see years ...
CMI forges their eights out of aircraft-grade aluminum alloys, instead of the traditional steel. This design choice keeps their product light, produces excellent friction, and maintains the safety standards. Hot forging their product produces an advantageous molecular alignment. CMI's exclusive hardcoat mixture protects the aluminum.
The CMI Res...
The CMI Rope Jack is a Mechanical Advantage tool for pre-tensioning static lines, light lifting and cabling. The Rope Jack is small enough and light enough to be carried aloft by a climber for Mechanical Advantage within the crown. The length of the handle on the Rope Jack limits excessive loading to avoid rope damage. Under no circumstances sho...
The CMI RP104 is a lightweight and functional rescue pulley. It has stainless steel axels, which are built around two 3/8" aluminum sheaves. The pulley uses sealed needle bearing. It accepts up to 5/8" diameter ropes, and features a wide side plate for maximum rope protection. If you are looking for a pulley for rescue, you can't go wrong with t...
CMI’s RP105 is a pulley with a 16,000 pound breaking strength. It has a 5/8" rope capability, and the large rigging point accepts the largest carabiners--two of them. The extra wide, skirted side plates ensure that rope damage is kept to a minimum. The RP105 is a pulley with tremendous strength and durability, perfect for the professional arbori...
This is a double sheave version of the CMI RP105. It has stainless steel side plates and two 3” aluminum sheaves. The axle is also stainless steel. As you can see, the RP105D is built for strength. Although the addition of another sheave makes the pulley larger, it also gives it an additional 4000lbs over the standard RP105. If you're a rescuer ...
Nothing tips the scales like these little gems! Featuring 1/2" rope capacities and 7075-T6 anodized aluminum side plates for unparalleled strength, these pulleys have a place in every climber or rescuer's pack.
Rescue model. Purple anodized aluminum sideplates, 1 1/4" aluminum sheave, bushing, and aluminum axle.
CMI designs these pulleys for rescuers on a budget. They may lack some of the "bells and whistles" of their Hi-Roller series, but they provide the same rugged and dependable service CMI has built its reputation on. Stainless steel side plates, 2" steel sheave, bushing, and stainless steel axle.
The RP124 is a reliable double-sheaved pulley from CMI. It has stainless steel side plates, two 4" aluminum sheaves, bushing, and stainless steel axle.
CMI designed their RP130 for use in a false crotch system to reduce wear on bull ropes. Its upper bushing maximises the strength of the sling, while its side plates prevent damage to the rope. The RP130’s upper bushing will allow slings up to 3/4” in diameter. The lower sheave will accept bull ropes up to 5/8”.
The pulley’s knurled knobs allow ...
CMI designed their RP131 for use in a false crotch system to reduce wear on bull ropes. Its upper bushing maximises the strength of the sling, while its side plates prevent damage to the rope. The RP131’s upper bushing will allow slings up to 3/4” in diameter. The lower sheave will accept bull ropes up to 3/4".
The pulley’s knurled knobs allow f...
This CMI Standard 8 Ring has the same design as it did in 1974. However, it is still as popular today as it was back then. CMI crafts it from 6061-T6 aluminum alloy, maximizing it’s strength-to-weight ration. They also hard coat it with their proprietary mix to further extend its working life. Available in black. The Standard 8 is both versatile...
Capital Safety specifically designs their Rollgliss RescueMate Micro Haul Kit for professionals that need compact gear. In emergency pick off or rescue rigging situations, it is often impractical to have bulky gear. The kit comes already rigged and is ready to use out of the bag. It deploys in seconds; just attach to an anchor and go.
The DBI RescueMate Prusik is a single sheave pulley. The pulley provides a great mechanical advantage, which translates into more hauling power for the user. The pulley also incorporates swivel cheeks. These extend beyond the surface of the rope to protect it from abrasions.
The pulley also has several features that contribute to its durabilit...