100% Canadian Owned and Operated
Welcome to Universal Field Supplies!
The Gibbs 4s Ascender is intended for litter raising and load hauling-where extra stength and durability is required. Not for self delay by solo climbers. Gibbs Ascenders are designed not to slip on iced and muddy ropes. Their simple, durable construction makes them almost fool proof. They are easy to assemble on the rope, yet will not slip un...
As Petzl has created the ID for rescue, it lacks a gated attachment hole. Its multi-functional handle allows the user to unblock rope and control descent with their hand on the free end of the rope. The user can also move more efficiently on horizontal or low-angle terrain thanks to the button on the handle. The ID enables them get into position...
This Screw Pin Twisted Shackle is stainless steel and has a 5/16" pin diameter. It also has a 5/8" opening, and a breaking strength 5325 lbs. Arborists and tree climber use the shackle to connect a rope grab to a saddle.
Petzl designed the Ascension for ascending, and occasionally for hauling (progress capture). It features a wide and ergonomic handle, which allows the user a comfortable yet powerful grip. It is light enough to leave on your harness all day, yet is comfortable enough for long ascents.
Its toothed cam with self-cleaning slot optimizes performanc...
LIGHT, COMPACT AND EFFICIENT
•Equipped with a lever that keeps the device open, thus facilitating the insertion of the rope and preventing it from coming out.
•Cam/lever mechanism totally integrated in the body.
•Developer to grip also on dirty and icy ropes, thanks to the self-cleaning cam.
•Fully adjustable webbing for a correct positioning.
The Petzl Chest Rope Clamp is both compact and lightweight. It combines with ASCENSION handled rope clamp to form a truly dependable climbing solution. Its cam is toothed and has a self-cleaning slot, which ensures optimal performance under any condition. Also, as the cam is stainless steel the clamp has a better resistance to corrosion when com...
The ZK-2 Rope Wrench provides consistent friction for Single Rope Technique (SRT) climbing. It minimizes slack and has 1:1 efficiency. The ZK-2 allows simple redirects and works on multiple limbs.
The rope wrench has rounded side plates and pins, minimizing rope wear. It’s fitted with a pulley wheel that supports the rope radius and minimizes ...
Use a stiffened tether with the Rope Wrench, to connect the wrench to the climbing system. Doing this pushes the wrench up the rope during ascent, keeping slack out of the system.
For exceptional rope ascents
, Petzl Footape can be attached to the ASCENSION BASIC rope clamps. The Footape has an abrasion-resistant underfoot strap. It is slightly rigid, to make it easier to step into.
The elastic keeps the user's foot in the loop. It is also height adjustable and works with any shoe type. The Footape stores easily when n...
The ISC Wales Mini Rope Grab is anodized high strength aluminum, which makes it suitable for a variety of applications. When used on an EN1891 rope, it can be used without a shock absorber.
The 6.27 oz rope grab has a rope diameter of 10.5 to 13mm, and its minimum breaking strength depends on the rope type. Users can also the grab on a work posi...
The Patent Pending BuckGrab, Model 5004B, is the revolutionary new LAD (Length Adjusting Device) from Buckingham that incorporates a 90° twist in the eye of the CAM eliminating the need for a locking twisted clevis. The BuckGrab has a secure closure provided by a nylock nut fitted with a split ring as an added precaution.The BuckGrab is ideal fo...
Dynamic rope grab kits are a practical solution for many fall arrest applications. They are equipped with a Panic Lock feature as well as an orientation lockout feature that will not allow the rope grab to be installed upside down. All of our Vertical rope lifelines and rope grabs combinations meet and exceed ANSI, OSHA and CSA.
This is an autom...
CMI’s Foot Ascender makes climbing easier! This boot-mounted device keeps tension on the rope, which allows for easier advancement of the main ascender. This, in turn, provides better mechanics by keeping your body upright. The ascender is anodized aluminum and has hard coated cams.Available in right and left foot models.
The Petzl Ascentree is exactly what it looks like, which is two Petzl ascenders riveted together. It is designed for ascending double ropes in trees using the "footlock" technique or with two PANTIN foot ascenders. It features ergonomic and molded handles that allow for a grip that is comfortable yet powerful. It has a toothed cam with self-clea...
Gibbs Klimair Swivel Ascender Use this tool only
The Petzl Micrograb replaces a prusik knot for improvising an adjustable lanyard. It slides up the rope smoothly and jams when pulled down by the cam. Hold the cam in to release the unit. The Micrograb has an ergonomic cam for rapid length adjustment, and an integrated cam spring helps avoid accidental snagging and increases durability. If you a...
The Petzl Pantin Foot Ascender is designed to make ascending a rope both faster and less tiring. It is used to complement CROLL, ASCENSION or ASCENTREE rope clamps. The mechanism is totally integrated into the body of the clamp, to help prevent snagging. The Pantin releases from the rope with a simple backwards movement of the foot.The cam facil...
The Petzl Pirana descender offers its users three braking options and can be installed on a rope without removing it from the harness. Petzl has designed it for canyoning descent techniques. The Pirana has two supplementary braking spurs, which the user to vary the friction during descent. A carabiner with a cross section of 12 mm (e.g. ATTACHE)...
The Petzl Rig is designed for expert rope access work. The multi-functional handle allows users to unblock the rope and control the descent with the hand on the free end of the rope. It also allows the user to get into position without having to tie off the device. The automatic return system on the handle limits risks in case of an involuntary ...
The Petzl ZigZag is a mechanical prusik that allows the user to move around using the classic pulley system technique. The linked rings provide precision and fluidity when moving. The pulley is mounted on sealed ball bearings and allows the user to quickly take up slack.
The Zigzag is made of steel, a material that offers great durability. The t...
Petzl designs their Zillion as an adjustable lanyard for arborist work positioning. Used doubled on the harness side attachment points; it distributes the load on the waist belt. It can be adjusted with one hand, thanks to the progressive locking and unlocking action of the device.
A sealed ball bearing-mounted pulley the user to easily take up...
Rope grab with 90 degree cam attachment hole
Next generation rope grab/adjuster designed to be left of the rope
Perfect for for horizontal line
Weight: 5 oz (142 gm)
Rope Size: 9-13 mm
This revolutionary device combines ascending and descending in one piece of gear.
Works with both single and double rope technique, with seamless transition between ascending and descending.
Weight: 10.9 oz (308 gm)
Rope Size: 11-13 mm
The CMI Rope Jack is a Mechanical Advantage tool for pre-tensioning static lines, light lifting and cabling. The Rope Jack is small enough and light enough to be carried aloft by a climber for Mechanical Advantage within the crown. The length of the handle on the Rope Jack limits excessive loading to avoid rope damage. Under no circumstances sho...