100% Canadian Owned and Operated
Welcome to Universal Field Supplies!
The 4SRT stiff Tethers have been designed specifically to offer optimal performance from your ISC Rope Wrench system. Designed for use with the hitch climber pulley. 30 cm length.
The 4SRT Chester has been designed specifically to aid climbing SRT. The harness offers a great balance of effectiveness and comfort.
It is designed to keep a breast clip up and easier to carry on rising. The shoulder piece is worn loosely and do not need to be attached to the belt. The attachment loops are positioned at various heights so tha...
This Split Tail is made from Samson ArborMaster Goldstreak. Use it with a split tail climbing system, with contrasting colors. It can also be used as a dual anchor point system for limb walking.
The At Height Armor Prus features a blended technora cover that prevents melting and glazing. This cover is rated 234°C higher than standard polyester and has very low stretch. The Armor Prus also meets ITC climbing competition rules.
The Spectra core incorporates a safety feature made of twin Kevlar strands. In the event of cover failure, this ...
This is a 10mm x 30" with stitched eyes on both ends. The eyes are smaller to stop them from slipping over the carabiner or snap. 5000 lb. tensile.
The Bee-Line 3/8" (10mm) single eye stitched split tail offers the user the ability to make a Blake's or Tautline hitch onto their climbing line for ascending and for maneuvering.
The two-inch stitched pattern creating the eye is covered with heat shrink tubing for longer wear. The stitched eye is tested to meet a minimum 5,000 lbs. tensile pul...
This Eye & Eye Hitch Cord provides a blend of heat tolerance and grip. Ocean Polyester created it by combining Aramid and Polyester.
Standard size is 10mm X 30". Other lengths are available as a special order
Minimum Breaking Strength is 30kN
Bee Line – High Heat resistance – due to its Vectran core and a 75% / 25 % Technora / Poyester cover braid, Bee Line has one of the highest heat resistant covers available. @Height Termination Options: Sewn Termination Only! 15'
With ISC Captive eye carabiner
The Bee-Line 3/8" (10mm) eye to eye stitched tail allows the user to create a closed friction hitch, such as the Schwabisch, Prusik, or the Distel. Though there are other hitches, all require the user to practice tying the knot and using it before working at height.
The two-inch stitch pattern that creates the eyes is covered with heat shrink t...
Designed for use with the latest friction knots
This 5’ split tail is made from New England Rope's 1/2" Hi-Vee rope. It has a 5" spliced eye on one end. The split tail is rated at 6480 lbs. and comes tagged with the strength rating. It also has a unique serial number for tracking inspections.
Ice Tail is a single braid tail with a soft feel. It’s easy to splice and will not melt or be seared by heat. Ice Tail is great for heat resistant eye-and-eye tails.
28" long X 3/8" diameter. There are 3/4" spliced eyes in each end. They come tagged with date of manufacture as well as safe working load.
Easy to inspect
HRC (Heat Resistant Cord) from New England Ropes is a highly heat-resistant prusik with a “fuzzy” texture that helps it grab and is friendly to handle. Durable, low-stretch, and long-lasting hitch cord. HRC (Heat Resistant Cord) in this diameter is best-suited for use on 7/16” (11mm) climbing lines.
Cord Tensile Strength: 7,250 lb